View SG8020_8404441.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SG8020 2.5a output current igbt gate drive optocoupler description the SG8020 is an optically coupled 2.5a output current gate driver, designed to drive most 1200v / 10 0a igbts and mosfets. it is intended for driving high power igbts and mosfets used in motor control inverter applications. the circuit consists of an infrared input led optically coupled to an integrated circuit which utilizes a high speed driver. the SG8020 comes standard in a miniature 8 pin dip package. schematic diagram agency approvals ? ul/c -ul approved to ul1577 ? vde approved to en60747 - 5 - 5 applications ? igbt / mosfet gate drives ? ac & brushless dc motor drives ? industrial inverters ? uninterruptable power supplies (ups) ? switch mode power supplies ordering information part number description SG8020 8 pin dip, (50/ tube ) SG8020 - h 0. 40? ( 10.16mm ) wide lead spacing ( vde0884 ) SG8020 -s 8 pin smd, (50/tube) SG8020 - str 8 pin smd, tape and reel (1000/reel) feature s ? high common mode rejection: 25kv/ s minimum @ v cm = 1500v ? 2.5a maximum peak output current ? fast switching speeds o 400ns maximum propagation delay o 250ns maximum propagation delay difference ? i cc =3 .8 ma maximum supply current ? wide supply voltage range (15v to 30v) ? under voltage lockout protec tion (uvlo) with hysteresis ? broad temperature performance range (- 40c to 100c) ? low power dissipation (r on 1) ? rail -to - rail output voltage ? high input to output isolation (5kv rms ) ? rohs / pb - free / reach compliant note: suffixes listed above are not included in marking on device for part number identification ** a 0.1 f bypass capacitor must be connected between pins 5 & 8 (gnd & v cc ) truth table (positive logic) led v cc - v ee (?positive going?) turn on v cc - v ee (?negative going?) turn off v o off 0 ? 30v 0 ? 30v low on 0 ? 11v 0 ? 9.5v low on 11 ? 13.5v 10 ? 12v transi tion on 13.5 ? 30v 12 ? 30v high SG8020 ? 20 15 solid state optronics ? san jo s , ca www.ssousa.com ? +1.408.293. 4600 page 1 of 15 SG8020 /h/s/ tr rev03 (02/02/2015 ) 00 2350
SG8020 2.5a output current igbt gate drive optocoupler parameter symbol min. typ. max. units test conditions fig. notes general maximum ratings storage temperature t st - 55 - 125 c operating temperature t a - 40 - 100 c isolation voltage v iso 5000 - - v rms supply voltage v cc 0 - 35 v solder temperature ? wave (10 sec) t sol - - 260 c 8 total power dissipation p t - - 295 mw input maximum ratings average forward input current i f(avg) - - 25 ma reverse input voltage v r - - 5 v peak transient input current i f(tran) - - 1 a <1 s pulse width, 300pps input current (rise / fall time) t r(in) / t f(in) - - 500 ns input power dissipation p i - - 45 mw 9 outp ut maximum ratings ?high? peak output current i oh(peak) - - 2.5 a 1 ?low? peak output current i ol(peak) - - 2.5 a 1 output voltage v o - - v cc v output power dissipation p o - - 250 mw 10 absolute maximum ratings, t a = 25c (unless otherwise specified) the values indi cated are absolute stress ratings. functional operation of the device is not implied at these or any conditions in excess of those defined in electrical characteristics section of this document. exposure to absolute maximum ratings may cause permanent dama ge to the device and may adversely affect reliability. recommended operating conditions the values indicated are recommended for steady, consistent operation with optimal performance across the operating temperatu re ra nge. parameter symbol min. typ. max. units test conditions fig. notes recommended specifications operating temperature t a - 40 - 100 c supply voltage v cc 15 - 30 v input current (on) i fl(on) 7 - 16 ma input voltage (off) v f(off) - 3.0 - 0.8 v ? 20 15 solid state optronics ? san jo s , ca www.ssousa.com ? +1.408.293.4600 page 2 of 15 SG8020 /h/s/ tr rev03 (02/02/2015 ) 00 2350
SG8020 2.5a output current igbt gate drive optocoupler electrical characteristics, t a = 25c , v ee = ground and v cc = 30v (unless otherwise specified) parameter symbol min. typ. max. units test conditions fig. notes input specifications led forward voltage v f 1.2 1.4 1.8 v i f = 10ma 15 led forward voltage temperature coefficient v f / t - - 1.24 - mv/c i f = 10ma led reverse voltage bv r 5 - - v i r = 10 a input threshold current (low to high) i flh - 2.9 5 ma v o > 5v, i o = 0a 9,16,21 input threshold voltage (high to low) v f hl 0.8 - - v v o < 5v, i o = 0a input capacitance c in - 33 - pf f = 1mhz, v f = 0v output specifications high le vel supply current i cch - 1 3 ma open v o , i f = 7 to 16ma 7,8 low level supply current i ccl - 1 3 ma open v o , v f = - 3 to +0.8v 7,8 high level output current i oh - 1.0 - 2.0 - 2.5 a v o = (v cc ? 3v) 2,13,19 1 - - 2.0 a v o = (v cc ? 6v) 2,13,19 1 low level output current i ol 1.0 2.0 2.5 a v o = (v cc + 3v) 5,6,20 1 2.5 - - a v o = (v cc + 6v) 5,6,20 1 high level output voltage v oh v cc - 0.25 v cc - 0.1 - v i f = 10ma, i o = - 100ma 1,3,17 low level output voltage v ol - v ee + 0.1 v ee + 0.25 v i f = 0ma, i o = 100ma 4,16,18 under voltage lockout threshold v uvlo+ 11.5 13.1 13.5 v v o > 5v, i f = 10ma 22 v uvlo - 10.0 11.5 12.0 v v o < 5v, i f = 10ma 22 under voltage lockout hysteresis uvlo hys - 1.6 - v 22 isolation specifications withstand insulation test v iso 5000 - - v rh 40 - 60%, t = 1 min 2,3 input- output resistance r i - o - 10 12 - v i - o = 500v dc 2 input- output capacitance c i - o - 0.9 - pf f =1mhz 2 ? 20 15 solid state optronics ? san jo s , ca www.ssousa.com ? +1.408.293.4600 page 3 of 15 SG8020 /h/s/ tr rev03 (02/02/2015 ) 00 2350
SG8020 2.5a output current igbt gate drive optocoupler electrical characteristics, continued? t a = 25c , v ee = ground and v cc = 30v (unless otherwise specified) parameter symbol min. typ. max. units test conditions fig. notes switching specifications propagation delay time to high output level t plh 100 210 400 ns i f = 7 to 16ma v cc = 15 to 30v v ee = ground rg = 10 cg = 10nf f = 10khz duty cycle = 50% 10 11 12 13 14 23 propagation delay time to low output level t phl 100 185 400 pulse width distortion pwd - 25 100 7 propagation delay difference between any two parts pdd - 250 - 250 4 output rise time ( 10 to 90%) t r - 50 - 23 output fall time (90 ? 10%) t f - 45 - uvlo turn on delay t uvlo on - 1.5 - s i f = 10ma, v o > 5v uvlo turn off delay t uvlo off - 0.2 - s i f = 10ma, v o < 5v common mode transient immunity at high level output | cm h | 25 35 - kv/ s i f = 10 to 16ma v cm = 1500v t a = 25c v cc = 30v 24 5 common mode transient immunity at low level output | cm l | 25 35 - kv/ s v f = 0v v cm = 1500v t a = 25c v cc = 3v 6 notes 1. maximum pu lse width = 10 s, maximum duty cycle = 0.2% 2. device is considered a two - terminal device: pins 1, 2, 3, and 4 shorted together, and pins 5, 6, 7, and 8 shorted together 3. in accordance with ul 1577, each optocoupler is proof tested by applying an in sulation test voltage 6000 v rms for one second (leakage current less than 5 a) 4. the difference between t phl and t plh between any two SG8020 devices under the same test conditions 5. common mode transient immunity in high stage is the maximum tolera ble negative dv cm /dt on the trailing edge of the common mode impulse signal, v cm , to assure that the output will remain high 6. common mode transient immunity in low stage is the maximum tolerable positive dv cm /dt on the leading edge of the common mode i mpulse signal, v cm , to assure that the output will remain low 7. pulse width distortion is defined as | t phl ? t plh | for any given device 8. 260c for 10 seconds. refer to the lead free solder reflow profile for more information 9. derate linearly a bove 70c free air temperature at a rate of 0.47mw / c 10. derate linerally above 70c free air temperature at a rate of 4.8mw / c ? 20 15 solid state optronics ? san jo s , ca www.ssousa.com ? +1.408.293.4600 page 4 of 15 SG8020 /h/s/ tr rev03 (02/02/2015 ) 00 2350
SG8020 2.5a output current igbt gate drive optocoupler figure 5 : output low current vs. temperature (c) figure 6 : output low voltage drop vs. low current figure 2 : output high current vs. temperature (c) figure 3 : output high voltage drop vs. high current figure 4 : output low voltage vs. temperature (c) figure 1 : output high voltage drop vs. temperature (c) SG8020 performance & characteristics plots, t a = 25 c (unless otherwise specified) ambient temperature ? t a (c) (v oh ? v cc ) ? output hig h voltage drop (v) ambient temperature ? t a (c) i oh ? output high current (a) i oh ? output high current (a) (v oh ? v cc ) ? output high voltage drop (v) ambient temperature ? t a (c) v ol ? output low voltage drop (v) ambient temperature ? t a (c) i ol ? outpu t low current (a) i o l ? output low current (a) v ol ? output low voltage drop (v) ? 20 15 solid state optronics ? san jo s , ca www.ssousa.com ? +1.408.293.4600 page 5 of 15 SG8020 /h/s/ tr rev03 (02/02/2015 ) 00 2350
SG8020 2.5a output current igbt gate drive optocoupler SG8020 performance & characteristics plots, continued? t a = 25 c (unless otherwise specified) figure 7 : supply current (i cc ) vs. temperature (c) figure 8 : supply curr ent (i cc ) vs. supply voltage (v cc ) figure 1 0 : propagation delay (t p ) vs. supply voltage (v cc ) figure 9 : low to high input current threshold (i flh ) vs. temperature (c) figure 1 1 : propagation delay (t p ) vs. forward current (i f ) figure 1 2 : propagati on delay (t p ) vs. temperature (c) ambient temperature ? t a (c) i cc ? supply current (ma) v cc ? supply voltage (v) i cc ? supply current (ma) ambient temperature ? t a (c) i flh ? low to high input current threshold (ma) v cc ? supply voltage (v) t p ? propagation delay (ns) i f ? forward current (ma) t p ? propagation delay (ns) ambient temperature ? t a (c) t p ? propagation delay (ns) ? 20 15 solid state optronics ? san jo s , ca www.ssousa.com ? +1.408.293.4600 page 6 of 15 SG8020 /h/s/ tr rev03 (02/02/2015 ) 00 2350
SG8020 2.5a output current igbt gate drive optocoupler figure 13 : propagation delay (t p ) vs. series load resistance (r g ) figure 14 : propagation delay (t p ) vs. load capacitance (c g ) figure 16 : transfer characteristics figure 15 : forward current (i f ) vs. forward voltage (v f ) rg ? load resistance () t p ? propagation delay (ns) cg ? load capacitance (nf) t p ? propagation delay (ns) v f ? forward voltage (v) i f ? forward current (ma) i f ? forward current (ma) v o ? output voltage (v) SG8020 performance & characteristics plots, continued? t a = 25 c (unless otherwise specified) ? 20 15 solid state optronics ? san jo s , ca www.ssousa.com ? +1.408.293.4600 page 7 of 15 SG8020 /h/s/ tr rev03 (02/02/2015 ) 00 2350
SG8020 2.5a output current igbt gate drive optocoupler SG8020 electrical test circuits figure 1 7 : high level output voltage (v oh ) test circuit figure 1 8 : low leve l output voltage (v o l ) test circuit f igure 2 0 : low level output current (i o l ) test circuit figure 1 9 : high level output current (i oh ) test circuit figure 2 1 : input threshold current (i fl h ) test circuit f igure 22 : uvlo test circuit i f = 7ma t o 16ma pw = 10 s period = 5ms i f = 7ma to 16ma pw = 4.99ms period = 5ms i f = 10ma i f = 10ma ? 20 15 solid state optronics ? san jo s , ca www.ssousa.com ? +1.408.293.4600 page 8 of 15 SG8020 /h/s/ tr rev03 (02/02/2015 ) 00 2350
SG8020 2.5a output current igbt gate drive optocoupler SG8020 electrical test circuits, continued? figure 23 : rise time (t r ), fall time (t f ), and propagation delay times (t plh and t p hl ) test circuit & waveform s figure 2 4 : cmr test circuit & waveform s ? 20 15 solid state optronics ? san jo s , ca www.ssousa.com ? +1.408.293.4600 page 9 of 15 SG8020 /h/s/ tr rev03 (02/02/2015 ) 00 2350
SG8020 2.5a output current igbt gate drive optocoupler process step description parameter a preheat start temperature (oc) 150oc b preheat finish temperature (oc) 180oc c preheat time (s) 90 - 120s d melting temperature (oc) 230oc e time above melting temperature (s) 30s f peak temperature, at terminal (oc) 260oc g dwell time at peak temperature (s) 10s h cool - down (oc/s) <6oc/s SG8020 solder reflow temperature profile recommendations (1) infrared reflow : refer to the following figure as an example of an optimal temperature profile for single occurrence in frared reflow. soldering process should not exceed temperature or time limits expressed herein. surface temperature of device package should not exceed 250oc: a b c d f e g h ( 2 ) wave solder : ( 3 ) hand solder : maximum temperature: 260oc (a t terminal) maximum time: 10s pre - heating: 100 - 150oc (30 - 90s) single occurrence maximum temperature: 350oc (at tip of soldering iron) maximum time: 3s single occurrence ? 20 15 solid state optronics ? san jo s , ca www.ssousa.com ? +1.408.293.4600 page 10 of 15 SG8020 /h/s/ tr rev03 (02/02/2015 ) 00 2350
SG8020 2.5a output current igbt gate drive optocoupler SG8020 package dimensions 8 pin dip package note: all dimensions in m illimeters [mm ] with inches in parenthesis () ? 20 15 solid state optronics ? san jo s , ca www.ssousa.com ? +1.408.293.4600 page 11 of 15 SG8020 /h/s/ tr rev03 (02/02/2015 ) 00 2350
SG8020 2.5a output current igbt gate drive optocoupler SG8020 package dimensions 8 pin wide lead space package ( - h) note: all dimensions in millimeters [mm ] with inches in parenthesis () ? 20 15 solid state optronics ? san jo s , ca www.ssousa.com ? +1.408.293.4600 page 12 of 15 SG8020 /h/s/ tr rev03 (02/02/2015 ) 00 2350
SG8020 2.5a output current igbt gate drive optocoupler SG8020 package dimensions 8 pin smd surface mount package ( - s) note: all dimensions in millimeters [mm ] with inches in parenthesis () ? 20 15 solid state optronics ? san jo s , ca www.ssousa.com ? +1.408.293.4600 page 13 of 15 SG8020 /h/s/ tr rev03 (02/02/2015 ) 00 2350
SG8020 2.5a output current igbt gate drive optocoupler SG8020 packaging specifications tape & reel specifications (t&r) note: all dimensions in millimeters [mm] with inches in parenthesis () specification symbol dimensions, mm ( inches ) tape width w 16 0.3 ( 0.63 ) sprocket hole pitch p0 4 0.1 ( 0.15 ) compartment location f p2 7.5 0.1 ( 0.295 ) 2 0.1 ( 0.079 ) compartment pitch p1 12 0.1 ( 0.472 ) ? 20 15 solid state optronics ? san jo s , ca www.ssousa.com ? +1.408.293.4600 page 14 of 15 SG8020 /h/s/ tr rev03 (02/02/2015 ) 00 2350
SG8020 2.5a output current igbt gate drive optocoupler note: all weights above are in grams, and include packaging materials where applicable device single unit full tube (5 0pcs) full pouch (10 tubes) full reel (1 000pcs) SG8020 0.54 48 490 - SG8020 - s 0.53 46 470 - SG8020 - h 0.55 49 500 - SG8020 - str 0.53 - - 480 solid state optronics (sso) makes no warranties or representations with regards to the completeness and accuracy of this docu ment. sso reserves the right to make changes to product description, specifications at an y time without further notices. sso shall not assume any liability ari sing out of the application or use of any product or circuit described herein. neither circuit patent licenses nor indemnity are expressed or implied. except as specified in sso? s stand ard term s & conditions, sso disclaims liability for consequential or other damage, and we make no other warrant y , expresse d or implied, includ ing merchantability and fitness for particular use. disclaimer sso does not autho rize use of its devices in life support applications wherein failure or malfunction of a device may lead to personal injury o r death. users of sso devices in life support applications assume all risks of such use and agree to indemnify sso against any and all damages resulting from such use. life support devices are defined as devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when used properly in accordance with instructions for use can be reasonably expected to result in significant injury to the user, or (d) a critical component of a life support device or syst em whose failure can be reasonably expected to cause failure of the life support device or system, or to affect its safety or effectiveness. life support policy SG8020 packaging marking sg 8020 yww date code pin 1 SG8020 package weights ? 20 15 solid state optronics ? san jo s , ca www.ssousa.com ? +1.408.293.4600 page 15 of 15 SG8020 /h/s/ tr rev03 (02/02/2015 ) 00 2350

▲Up To Search▲

Price & Availability of SG8020

	To Download SG8020 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .